FTM-5112C-SL80G Datasheet, PDF (1/10 Pages) Source Photonics, Inc. – 1.25G Spring-Latch SFP Transceiver

Apr 9, 2007
1.25G Spring-Latch SFP Transceiver
(For 80km transmission, RoHS compliant)
Members of Flexon^TM Family
‹ Compatible with FCC 47 CFR Part 15, Class B
‹ Compatible with FDA 21 CFR 1040.10 and
1040.11, Class I
‹ Compatible with Telcordia GR-468-CORE
‹ RoHS compliant
Description
Features
‹ 1.25Gbps bi-directional data links
‹ 80km transmission distance with SMF
‹ 1550nm DFB laser transmitter
‹ SFP MSA package with LC optical receptacle
‹ With Spring latch for high density application
‹ Single +3.3V power supply
‹ Hot-pluggable capability
‹ Low power dissipation
‹ Very low EMI and excellent ESD protection
‹ Class I laser product
‹ Monitoring interface compatible with SFF-8472
‹ Operation case temperature: 0℃ to 70℃
Applications
‹ Switch to Switch interface
‹ Switched backplane applications
‹ Router/Server interface
‹ Other optical transmission systems
Fiberxon’s FTM-5112C-SL80G, 1.25Gbps SFP
transceivers are high performance, cost effective
modules. They are designed for Gigabit Ethernet
applications for 80km distance with SMF.
The transceiver consists of two sections: The
transmitter section incorporates a DFB laser. And
the receiver section consists of a PIN photodiode
integrated with a trans-impedance preamplifier (TIA).
All modules satisfy class I laser safety requirements.
The optical output can be disabled by a TTL logic
high-level input of Tx Disable. Tx Fault is provided to
indicate that degradation of the laser. Loss of signal
(LOS) output is provided to indicate the loss of an
input optical signal of receiver.
The standard serial ID information compatible SFP
MSA describes the transceiver’s capabilities,
standard interfaces, manufacturer and other
information. The host equipment can access this
information via the 2-wire serial CMOS EEPROM
protocol. For further information, please refer to SFP
Multi-Source Agreement (MSA).
FTM-5112C-SL80G is compliant with RoHS.
Standard
‹ Compatible with SFP MSA
‹ Compatible with IEEE 802.3z
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 1 of 10
Controlled Electronic Version. 24hrs Obsolete when printed out without authorization Last printed 2007-6-18 9:22