FTM-5012S-G50G Datasheet, PDF (1/9 Pages) Source Photonics, Inc. – 1.0625～1.25Gbps GBIC Transceiver

Nov 14, 2006
1.0625～1.25Gbps GBIC Transceiver
(For 50km transmission)
Members Of Flexon^TM Family
Compatible with FCC 47 CFR Part 15, Class B
Compatible with FDA 21 CFR 1040.10 and
1040.11, Class I
RoHS compliance
Description
Features
1.0625~1.25Gbps multi-rate
1550nm DFB laser and PIN photodiode for 50
transmission
Class I laser product
Low EMI and excellent ESD protection
Duplex SC optical interface
Extended power supply +3.3/5.0V compatibility
Standard serial ID information compatible with
SFF-8053
Operating case temperature: 0 to +70°C
Applications
Switch to Switch interface
Switched backplane applications
Router/Server interface
Other optical transmission systems
Fiberxon 1.0625~1.25Gbps GBIC transceivers are
high performance, cost effective modules. They are
designed for Gigabit Ethernet and 1x Fibre Channel
applications from 50km.
The transceiver consists of two sections: The
transmitter section incorporates a highly reliable
uncooled DFB laser. And the receiver section is a
PIN with a trans-impedance preamplifier (TIA). All
modules satisfy Class I Laser Safety requirements.
The standard serial ID information compatible with
GBIC MSA describes the transceiver’s capabilities,
standard interfaces, manufacturer and other
information. The host equipment can access this
information via the 2-wire serial CMOS EEPROM
protocol. For further information, please refer to
SFF-8053.
Standard
Compatible with GBIC specification (SFF-8053),
Rev 5.5
Compatible with ANSI specification for Fibre
Channel
Compatible with IEEE 802.3z
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 1 of 1
Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 2006-11-15 下午
04:56