FTM-5012C-SL80G Datasheet, PDF (1/9 Pages) Source Photonics, Inc. – 1.25G Spring-Latch SFP Transceiver

March. 24, 2006
1.25G Spring-Latch SFP Transceiver
( For 80km transmission, RoHS compliant )
Members of Flexon^TM Family
‹ Compatible with FDA 21 CFR 1040.10 and
1040.11, Class I
‹ Compatible with Telcordia GR-468-CORE
‹ RoHS Compliant
Description
Features
‹ Data-rate of 1.25Gbps operation
‹ 80km transmission with SMF
‹ 1550nm DFB laser and PIN photo-detector
‹ SFP MSA package with duplex LC connector
‹ With Spring-Latch for high density application
‹ Very low EMI and excellent ESD protection
‹ +3.3V single power supply
‹ Operating case temperature: 0~+70°C
Applications
‹ Switch to Switch interface
‹ Switched backplane applications
‹ Router/Server interface
‹ Other optical transmission systems
FTM-5012C-SL80G SFP transceiver is high
performance, cost effective module supporting
data-rate of 1.25Gbps and 80km transmission
distance on SMF.
The transceiver consists of two sections: The
transmitter section incorporates a DFB laser. And
the receiver section consists of a PIN photodiode
integrated with a trans-impedance preamplifier
(TIA). All modules satisfy class I laser safety
requirements.
The optical output can be disabled by a TTL logic
high-level input of Tx Disable. Tx Fault is provided
to indicate that degradation of the laser. Loss of
signal (LOS) output is provided to indicate the
loss of an input optical signal of receiver.
The standard serial ID information compatible
SFP MSA describes the transceiver’s capabilities,
standard interfaces, manufacturer and other
information. The host equipment can access this
information via the 2-wire serial CMOS EEPROM
protocol. For further information, please refer to
SFP Multi-Source Agreement (MSA).
Standard
FTM-5012C-SL80G is compliant with RoHS.
‹ Compatible with SFP MSA
‹ Compatible with IEEE 802.3
‹ Compatible with FCC 47 CFR Part 15, Class
B
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 1 of 9
Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 4/18/2006 11:04 AM