FTM-3413C-SL05ICG Datasheet, PDF (1/12 Pages) Source Photonics, Inc. – 100BASE-FX/1000BASE-X Spring-Latch SFP Transceiver

Feb. 5, 2007
100BASE-FX/1000BASE-X Spring-Latch SFP Transceiver
(For 550m/2km transmission with MCU version)
Members of Flexon^TM Family
‹ Compatible with IEEE 802.3ah-2004
‹ Compatible with FCC 47 CFR Part 15, Class B
‹ Compatible with FDA 21 CFR 1040.10 and
1040.11, Class I
‹ Compatible with Telcordia GR-468-CORE
‹ RoHS compliance
Features
‹ Build-in PHY supporting SGMII Interface
‹ Build-in high performance MCU supporting
easier configuration
‹ Dual data-rate of 100BASE-FX/1000BASE-LX
operation
‹ 1310nm FP laser and PIN photo-detector
‹ 0.5m~2km transmission with MMF at 125Mbps
‹ 0.5m~550m transmission with MMF at
1.25Gbps
‹ Standard serial ID information Compatible with
SFP MSA
‹ SFP MSA package with duplex LC connector
‹ With Spring-Latch for high density application
‹ Very low EMI and excellent ESD protection
‹ +3.3V single power supply
‹ Operating case temperature: -40 to +85°C
Applications
‹ Switch to Switch interface
‹ Switched backplane applications
‹ Router/Server interface
‹ Other optical transmission systems
Standard
Description
Fiberxon FTM-3413C-SL05iCG SFP transceiver is
high performance, cost effective modules. It is
designed for 100BASE-FX/1000BASE-LX
applications from 0.5m to 2km with MMF at
125Mbps,.from 0.5m to 550m transmission with
MMF at 1.25Gbps.
The transceiver consists of two sections: The
standard SFP part and the PHY part.
FTM-3413C-SL05iCG is built with SGMII interface.
It can operate as 100BASE-FX or 1000BASE-X by
software configuration.
The optical output can be disabled by a TTL logic
high-level input of Tx Disable. Tx Fault is provided to
indicate that degradation of the laser. Loss of signal
(LOS) output is provided to indicate the loss of an
input optical signal of receiver.
The standard serial ID information Compatible with
SFP MSA describes the transceiver’s capabilities,
standard interfaces, manufacturer and other
information. The host equipment can access this
information via the 2-wire serial CMOS EEPROM
protocol. For further information, please refer to SFP
Multi-Source Agreement (MSA).
‹ Compatible with SFP MSA
‹ Compatible with IEEE 802.3-2002
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 1 of 12