|
FTM-3401C-SL2CG Datasheet, PDF (1/10 Pages) Source Photonics, Inc. – 100BASE-FX Spring-Latch SGMII SFP Transceiver | |||
|
Nov 13, 2006
100BASE-FX Spring-Latch SGMII SFP Transceiver
(For 2km transmission with MCU version)
Members of FlexonTM Family
 Compatible with FDA 21 CFR 1040.10 and
1040.11, Class I
 Compatible with Telcordia GR-468-CORE
 RoHS compliance
Description
Features
 Build-in PHY supporting SGMII Interface
 Build-in high performance MCU supporting
easier configuration
 Support more link status monitor, such as CRC,
package counter and Far End Fault Indication
(FEFI)
 100BASE-FX operation
 1310nm FP laser and PIN photo-detector
 0.5m~2km transmission with MMF
 Standard serial ID information Compatible with
SFP MSA
 SFP MSA package with duplex LC connector
 With Spring-Latch for high density application
 Very low EMI and excellent ESD protection
 +3.3V single power supply
 Operating case temperature: 0 to +70°C
Applications
 Switch to Switch interface
 Switched backplane applications
 Router/Server interface
 Other optical transmission systems
Fiberxon FTM-3401C-SL2CG is designed for
100BASE-FX applications, supporting distance from
0.5m to 2km on MMF with build-in PHY device
supporting SGMII interface.
The optical output can be disabled by a TTL logic
high-level input of Tx Disable. Tx Fault is provided to
indicate that degradation of the laser. Loss of signal
(LOS) output is provided to indicate the loss of an
input optical signal of receiver.
The standard serial ID information Compatible with
SFP MSA describes the transceiverâs capabilities,
standard interfaces, manufacturer and other
information. The host equipment can access this
information via the 2-wire serial CMOS EEPROM
protocol. For further information, please refer to SFP
Multi-Source Agreement (MSA).
Fiberxon SGMII SFP transceiver product family
supports a range of media (Cat 5 copper,
multi-mode fiber, single mode fiber), multi-rate
(10/100/1000 Mbps) capabilities.
Building-in high performance MCU in this module,
Host can more easily configure all functions of
FTM-3401C-SL2CG.
Standard
 Compatible with SFP MSA
 Compatible with IEEE 802.3-2002
 Compatible with FCC 47 CFR Part 15, Class B
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 1 of 10
|
▷ |