FTM-3128C-SL2IG Datasheet, PDF (1/13 Pages) Source Photonics, Inc. – 155M～2.67Gbps Spring-latch SFP Transceiver

Apr 05, 2007
155M～2.67Gbps Spring-latch SFP Transceiver
(With monitoring function, industrial or extended case temperature
for 2~80km transmission, RoHS compliant)
Members of Flexon^TM Family
‹ Compatible with Telcordia GR-253-CORE
‹ Compatible with FCC 47 CFR Part 15, Class B
‹ Compatible with FDA 21 CFR 1040.10 and
1040.11, Class I
‹ RoHS compliant
Description
Features
‹ Support 155M～2.67Gbps multi-rate data links
‹ 1310nm FP laser and PIN photodiode for 2km
transmission
‹ 1310nm uncooled DFB laser and PIN
photodiode for 15km transmission
‹ 1310nm uncooled DFB laser and APD
photodiode for 40km transmission
‹ 1550nm uncooled DFB laser and APD
photodiode for 80km transmission
‹ Digital diagnostic monitor interface compliant
with SFF-8472
‹ SFP MSA package with duplex LC connector
‹ With Spring latch for high density application
‹ Class I laser product
‹ Hot-pluggable capability
‹ Operating case temperature:
Extended: -5 to +85℃ or -20 to +85℃
Industrial : -40 to +85℃
Applications
‹ 1×/2× Fiber Channel
‹ Gigabit Ethernet
‹ SDH/SONET/ATM
‹ Other optical links
Fiberxon 155M～2.67Gbps Spring-latch i-temp or
E-temp SFP transceiver is high performance, cost
effective module that supports data-rate up to
2.67Gbps and transmission distance from 2km to
80km.
The transceiver consists of two sections: The
transmitter section incorporates a FP or uncooled
DFB laser, and the receiver section consists of a
PIN photodiode or APD integrated with a
trans-impedance preamplifier (TIA). All modules
satisfy class I laser safety requirements.
The optical output can be disabled by a TTL logic
high-level input of Tx Disable. Tx Fault is provided to
indicate degradation of the laser. Loss of signal
(LOS) output is provided to indicate the loss of an
input optical signal of receiver.
The transceiver provides an enhanced monitoring
interface, which allows real time access to the
transceiver operating parameters such as
transceiver temperature, laser bias current,
transmitted optical power, received optical power
and transceiver supply voltage by reading a built-in
memory with I2C interface. For further information,
please refer to SFF-8472 Rev 9.5.
Standard
Fiberxon 155M～2.67Gbps i-temp or E-temp SFP
‹ Compatible with SFP MSA
transceiver is compliant with RoHS
‹ Compatible with SFF-8472 Rev 9.5
‹ Compatible with ITU-T G.957 and G.958
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 1 of 13