|
FTM-311XC-L10DG Datasheet, PDF (1/13 Pages) Source Photonics, Inc. – 10G 1310nm SFP+ Transceiver | |||
|
Nov 30, 2007
10G 1310nm SFP+ Transceiver
(With monitor function, up to 10Km transmission)
Members of FlexonTM Family
Standard
Features
 Support 10GE application at the data rate
9.95Gbps and 10.3125Gbps
 Up to 10km transmission distance on SMF
 1310nm DFB Laser and PIN receiver
 CDR included
 SFI electrical interface
 2-wire interface for integrated Digital Diagnostic
monitoring
 SFP+ MSA package with duplex LC connector
 Hot pluggable
 Very low EMI and excellent ESD protection
 Single +3.3V power supply
 Power consumption less than 1.5 W
 Operating case temperature: 0~+70°C
 Compliant with SFF-8431
 Compliant with SFF-8472 Rev 10.1
 Compliant with IEEE 802.3-2005 10GBASE-LR
and 10GBASE-LW
 Compliant with FCC 47 CFR Part 15, Class B
 Compliant with FDA 21 CFR 1040.10 and
1040.11, Class I
 Compliant with Telcordia GR-468-CORE
 RoHS compliance
Description
FTM-311XC-L10DG is a high performance, cost
effective module, which is optimized for 10G
Ethernet, supporting data-rate of 10.3125Gbps
(10GBASE-LR) or 9.953Gbps (10GBASE-LW), and
transmission distance up to 10km on SMF.
The transceiver consists of two sections: The
transmitter section incorporates a 1310nm DFB
Laser, driver. The receiver section consists of a PIN
photodiode integrated with a transimpedance
preamplifier (TIA) and a CDR.
Applications
 10GBASE-LR at 10.3125Gbps
 10GBASE-LW at 9.953Gbps
 Other optical links
The module is hot pluggable into the 20-pin
connector. The high-speed electrical interface is
based on low voltage logic, with nominal 100 Ohms
differential impedance and AC coupled in the
module. The optical output can be disabled by
LVTTL logic high-level input of TX_Disable. Loss of
signal (RX_LOS) output is provided to indicate the
loss of an input optical signal of receiver.
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 1 of 13
|
▷ |