FTM-3106C-SL15IG Datasheet, PDF (1/12 Pages) Source Photonics, Inc. – 622Mbps SFP Transceiver with Spring Latch

Mar. 16, 2007
622Mbps SFP Transceiver with Spring Latch
(With monitoring function, industrial case temperature
for 15km～80km transmission )
Members of Flexon^TM Family
‹ Compatible with ITU-T G.957 and G.958
‹ Compatible with Telcordia GR-253-CORE
‹ Compatible with FCC 47 CFR Part 15, Class B
‹ Compatible with FDA 21 CFR 1040.10 and
1040.11, Class I
‹ RoHS Compliance
Description
Features
‹ Up to 622Mbps data-rate
‹ 1310nm FP laser and PIN photodetector for
15km transmission
‹ 1310nm DFB laser and PIN photodetector for
40km transmission
‹ 1550nm uncooled DFB laser and PIN
photodetector for 80km transmission
‹ Digital diagnostic monitor interface compatible
with SFF-8472
‹ SFP MSA package with duplex LC connector
‹ With spring latch for easily removing
‹ Very low EMI and excellent ESD protection
‹ +3.3V single power supply
‹ Operating case temperature: -40 to +85°C
Fiberxon 622Mbps i-temp Spring-latch SFP
transceiver is high performance, cost effective
module that supports data-rate of 622Mbps and
transmission distance from 15km to 80km.
The transceiver consists of two sections: The
transmitter section incorporates a FP or uncooled
DFB laser, and the receiver section consists of a
PIN photodiode integrated with a trans-impedance
preamplifier (TIA). All modules satisfy class I laser
safety requirements.
The optical output can be disabled by a TTL logic
high-level input of Tx Disable. Tx Fault is provided to
indicate degradation of the laser. Loss of signal
(LOS) output is provided to indicate the loss of an
input optical signal of receiver.
Applications
An enhanced Digital Diagnostic Monitoring Interface
compatible with SFF-8472 has been incorporated
‹ SDH STM-4, S-4.1, L-4.1, L-4.2
into the transceivers. It allows real time access to
‹ SONET OC-12 IR1, LR1, LR2
‹ Other optical links
the transceiver operating parameters such as
transceiver temperature, laser bias current,
transmitted optical power, received optical power
Standard
and transceiver supply voltage by reading a built-in
memory with I²C interface. For further information,
please refer to SFF-8472 Rev 9.5.
‹ Compatible with SFP MSA
‹ Compatible with SFF-8472 Rev 9.5
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 1 of 12