|
FTM-3106C-SL15G Datasheet, PDF (1/13 Pages) Source Photonics, Inc. – 622Mbps SFP Transceiver with Spring Latch | |||
|
Mar. 16, 2007
622Mbps SFP Transceiver with Spring Latch
(With monitoring function, for 15kmï½80km transmission)
Members of FlexonTM Family
 Compatible with Telcordia GR-253-CORE
 Compatible with FCC 47 CFR Part 15, Class B
 Compatible with FDA 21 CFR 1040.10 and
1040.11, Class I
 Compliant with RoHS
Description
Features
 Up to 622Mbps data-rate
 1310nm FP laser and PIN photodetector for
15km and 40km transmission
 1310nm DFB laser and PIN photodetector for
40km transmission
 1550nm uncooled DFB laser and PIN
photodetector for 80km transmission
 Digital diagnostic monitor interface compatible
with SFF-8472
 SFP MSA package with duplex LC connector
 With spring latch for easily removing
 Very low EMI and excellent ESD protection
 +3.3V single power supply
 Operating case temperature: 0 to +70°C
Fiberxon 622Mbps Spring-latch SFP transceiver is
high performance, cost effective module that
supports data-rate of 622Mbps and transmission
distance from 15km to 80km.
The transceiver consists of two sections: The
transmitter section incorporates a FP or uncooled
DFB laser, and the receiver section consists of a
PIN photodiode integrated with a trans-impedance
preamplifier (TIA). All modules satisfy class I laser
safety requirements.
The optical output can be disabled by a TTL logic
high-level input of Tx Disable. Tx Fault is provided to
indicate degradation of the laser. Loss of signal
(LOS) output is provided to indicate the loss of an
input optical signal of receiver.
Applications
 SDH STM-4, S-4.1, L-4.1, L-4.2
 SONET OC-12 IR1, LR1, LR2
 Other optical links
Standard
An enhanced Digital Diagnostic Monitoring Interface
Compatible with SFF-8472 has been incorporated
into the transceivers. It allows real time access to
the transceiver operating parameters such as
transceiver temperature, laser bias current,
transmitted optical power, received optical power
and transceiver supply voltage by reading a built-in
memory with I2C interface. For further information,
please refer to SFF-8472 Rev 9.5.
 Compatible with SFP MSA
 Compatible with SFF-8472 Rev 9.5
 Compatible with ITU-T G.957 and G.958
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 1 of 13
|
▷ |