|
ICX422AL Datasheet, PDF (4/16 Pages) Sony Corporation – Diagonal 11mm (Type 2/3) CCD Image Sensor for EIA B/W Video Cameras | |||
|
◁ |
ICX422AL
DC Characteristics
Item
Output amplifier drain current
Input current
Input current
Symbol Min. Typ. Max. Unit Remarks
IDD
6
mA
IIN1
1
µA â4
IIN2
10
µA â5
â2 Indications of substrate voltage (VSUB) and reset gate clock voltage (VRGL) setting value
The setting value of the substrate voltage and reset gate clock voltage are indicated on the back of the
image sensor by a special code. Adjust the substrate voltage (VSUB) and reset gate clock voltage (VRGL) to
the indicated voltage. The adjustment precision is ±3%.
VSUB code â one character indication
VRGL code â one character indication
ââ
VRGL code VSUB code
"Code" and optimal setting correspond to each other as follows.
VRGL code 1 2 3 4 5 6 7
Optimal setting 0 0.5 1.0 1.5 2.0 2.5 3.0
VSUB code D E f G h J K L m N P Q R S T U V W X Y Z
Optimal setting 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 13.0 13.5 14.0 14.5 15.0 15.5 16.0 16.5 17.0 17.5 18.0 18.5 19.0
<Example> "5K" â VRGL = 2.0V
VSUB = 12.0V
â3 This must no exceed the VVL voltage of the vertical clock waveform.
â4 1) Current to each pin when 20V is applied to VDD, RD, VOUT, VSS, HIS and SUB pins, while pins that are
not tested are grounded.
2) Current to each pin when 20V is applied sequentially to VÏ1, VÏ2, VÏ3 and VÏ4 pins, while pins that are
not tested are grounded. However, 20V is applied to SUB pin.
3) Current to each pin when 15V is applied sequentially to HÏ1, HÏ2, RG and VGG pins, while pins that are
not tested are grounded. However, 15V is applied to SUB pin.
4) Current to VL pin when 30V is applied to VÏ1, VÏ3, HIS, VDD, RD and VOUT pins or when, 24V is applied
to RG pin or when, 20V is applied to VÏ2, VÏ4, VGG, VSS, HÏ1 and HÏ2 pins, while VL pin is grounded.
However, GND and SUB pins are left open.
â5 Current to SUB pin when 55V is applied to SUB pin, while pins that are not tested are grounded.
â4â
|
▷ |