ICX415AQ Datasheet, PDF (4/28 Pages) Sony Corporation – Diagonal 8mm (Type 1/2) Progressive Scan CCD Image Sensor with Square Pixel for Color Cameras

ICX415AQ
Bias Conditions
Item
Symbol Min. Typ. Max. Unit Remarks
Supply voltage
VDD
14.55 15.0 15.45 V
Protective transistor bias
VL
∗1
Substrate clock
φSUB
∗2
Reset gate clock
φRG
∗3
∗1 _{VL setting is the VVL voltage of the vertical transfer clock waveform, or the same voltage as the VL power}
supply for the V driver should be used.
∗2 _{Indications of substrate voltage setting value}
Set SUBCIR pin to open when applying a DC bias the substrate clock pin.
Adjust the substrate voltage because the setting value of the substrate voltage is indicated on the back of
image sensor by a special code when applying a DC bias the substrate clock pin.
VSUB code – two characters indication
↑
Integer portion
↑
Decimal portion
The integer portion of the code and the actual value correspond to each other as follows.
Integer portion of code A C d E f G h J
Value
5 6 7 8 9 10 11 12
[Example] "A5" → VSUB = 5.5V
∗3 _{Do not apply a DC bias to the reset gate clock pins, because a DC bias is generated within the CCD.}
DC Characteristics
Item
Supply current
Symbol Min. Typ. Max. Unit Remarks
IDD
4.0
7.0
9.0 mA
–4–