|
ICX074AK Datasheet, PDF (4/21 Pages) Sony Corporation – Diagonal 8mm (Type 1/2) Progressive Scan CCD Image Sensor with Square Pixel for Color Video Cameras | |||
|
◁ |
ICX074AK
Bias Conditions
Item
Supply voltage
Substrate voltage
adjustment range
Substrate voltage
adjustment precision
Protective transistor bias
Symbol
VDD
Min.
14.55
VSUB
9.0
Indicated
voltage â 0.1
VL
Typ.
15.0
Indicated
voltage
â2
Max.
15.45
18.5
Unit Remarks
V
V â1
Indicated
voltage + 0.1
V
DC Characteristics
Item
Symbol Min. Typ. Max. Unit Remarks
Supply current
IDD
10
mA
Input current
IIN1
1
µA â3
Input current
IIN2
10
µA â4
â1 Indications of substrate voltage (VSUB) setting value
The setting value of the substrate voltage is indicated on the back of image sensor by a special code.
Adjust the substrate voltage (VSUB) to the indicated voltage.
VSUB code â two characters indication
ââ
Integer portion Decimal portion
The integer portion of the code and the actual value correspond to each other as follows.
Integer portion of code
Value
9 AC d E fG h J K
9 10 11 12 13 14 15 16 17 18
<Example> "A5" â VSUB = 10.5V.
â2 VL setting is the VVL voltage of the vertical transfer clock waveform, or the same power supply as the VL
power supply for the V driver should be used.
â3 (1) Current to each pin when 18V is applied to VDD, VOUT1, VOUT2, HIS, RG, CGG1, CGG2, GND and SUB
pins, while all pins that are not tested are grounded.
(2) Current to each pin when 20V is applied sequentially to VÏ1, VÏ2 and VÏ3 pins, while all pins that are not
tested are grounded. However, 20V is applied to SUB pin.
(3) Current to each pin when 15V is applied sequentially to RG, HÏ1 and HÏ2 pins, while all pins that are not
tested are grounded. However, 15V is applied to SUB pin.
(4) Current to VL pin when 25V is applied to VÏ2, VÏ3, POGÏ, HIGÏ1, HIG2, VDD, VOUT1 and VOUT2 pins or
when, 15V is applied to VÏ1, VHOLDÏ, VOGÏ, CGG1, CGG2, HÏ1, HÏ2, HHGÏ1 and HHGÏ2 pins, while VL
pin is grounded. However, GND and SUB pins are left open.
(5) Current to GND pin when 20V is applied to the RG pin and the GND pin is grounded.
â4 Current to SUB pin when 55V is applied to SUB pin, while pins that are not tested are grounded.
â4â
|
▷ |