ICX038DLA Datasheet, PDF (4/20 Pages) Sony Corporation – Diagonal 8mm (Type 1/2) CCD Image Sensor for EIA Black-and-White Video Cameras

ICX038DLA
Bias Conditions 1 [when used in substrate bias internal generation mode]
Item
Symbol Min.
Typ.
Max. Unit Remarks
Output circuit supply voltage
VDD
14.55
15.0
15.45
V
Reset drain voltage
VRD
14.55
15.0
15.45
V VRD = VDD
Output circuit gate voltage
VGG
1.75
2.0
2.25
V
Output circuit source
Protective transistor bias
VSS
Grounded with 390Ω resistor
VL
∗₁
Substrate bias circuit supply voltage
Substrate clock
VDSUB
φSUB
14.55
15.0
∗₂
15.45
V
∗_{1 VL setting is the VVL voltage of the vertical transfer clock waveform, or the same power supply as the VL}
power supply for the V driver should be used. (When CXD1267AN is used.)
∗_{2 Do not apply a DC bias to the substrate clock pin, because a DC bias is generated within the CCD.}
Bias Conditions 2 [when used in substrate bias external adjustment mode]
Item
Symbol Min.
Typ.
Max. Unit Remarks
Output circuit supply voltage
Reset drain voltage
Output circuit gate voltage
Output circuit source
Protective transistor bias
Substrate bias circuit supply voltage
Substrate voltage adjustment range
Substrate voltage adjustment precision
VDD
VRD
VGG
VSS
VL
VDSUB
VSUB
∆VSUB
14.55
15.0
15.45
14.55
15.0
15.45
1.75
2.0
2.25
Grounded with 390Ω resistor
∗₃
∗₄
6.0
14.0
–3
+3
V
V VRD = VDD
V
V ^∗5
% ^∗5
∗_{3 VL setting is the VVL voltage of the vertical transfer clock waveform, or the same power supply as the VL}
power supply for the V driver should be used. (When CXD1267AN is used.)
∗_{4 Connect to GND or leave open.}
∗_{5 The setting value of the substrate voltage (VSUB) is indicated on the back of the image sensor by a special}
code. When adjusting the substrate voltage externally, adjust the substrate voltage to the indicated
voltage. The adjustment precision is ±3%. However, this setting value has not significance when used in
substrate bias internal generation mode.
VSUB code — one character indication
Code and optimal setting correspond to each other as follows.
VSUB code
E f G h J K L mNP QR S T U VW
Optimal setting 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 13.0 13.5 14.0
<Example> "L" → VSUB = 9.0V
DC Characteristics
Item
Symbol Min.
Output circuit supply current IDD
Typ. Max. Unit Remarks
5.0 10.0 mA
–4–