CXR704060 Datasheet, PDF (32/45 Pages) Sony Corporation – CMOS 32-bit Single Chip Microcomputer

CXR704060
Item Symbol
Pins
Conditions
I/O
leakage IZL
current
FAD0 to FAD7, FCLE,
FALE, FWE, FRE, FWP,
FCE0, FCE1, FRB0, FRB1
AN0 to AN7
VDIODF = 3.6V,
VI = 0V
AVDAD = 3.3V,
VI = 0V
RAMBK, RST
VDBK = 1.3V,
VI = 0V
Input
capacitance
CIN
PA to PG, PI to PR,
AN0 to AN7, FAD0 to FAD7,
FRB0, FRB1, MSDIO,
MSINS, KRB, KDI, EVA,
TEST0 to TEST4, RAMBK,
RST
Clock 1MHz
0V except the
measured pins
Min.
Typ. Max. Unit
–10 µA
–10 µA
–10 µA
11 pF
∗1 _{When used as PA0/PWM, PB, PD to PG and PI to PO, specified at IOH = –2.0mA and IOL = 2.0mA.}
∗2 _{When used as PA1/SDA, PA2/SCL, PC and dual function pins, specified at IOH = –4.0mA and IOL = 4.0mA.}
∗3 _{The PA to PG, PI to PR and FAD0 to FAD7 pins specify the input current when the pull-up resistor is}
selected, and specify the leakage current when non-resistor is selected.
(Topr = –20 to +70°C, DVDD = 1.1 to 1.3V, DVss = 0V reference)
Item
Supply
current^∗1
Pins
DVDD/VDBK
Symbol
IDD1
IDD2
IDDI
Conditions
Main execution mode^∗2
fSRC = 22.58MHz crystal oscillation
1/2 frequency division (11.29MHz)
(C1 = C2 = 10pF)^∗4
Main execution mode^∗3
fSRC = 22.58MHz crystal oscillation
(C1 = C2 = 10pF)^∗4
Main idle mode
fSRC = 22.58MHz crystal oscillation
(C1 = C2 = 10pF)^∗4
Min. Typ. Max. Unit
— 4.5 7.5 mA
—
—
29 mA
— 3.5 6.5 mA
IDDS1
Ta = 25°C (DVDD = 1.2V)
Stop mode
—
IDDS2
Ta = –20 to +50°C
100 300
µA
— 1500
∗1 _{When all output pins are left open, this indicates the current flowing to DVDD and VDBK.}
∗2 _{During ATRAC3 decoding operation.}
∗3 _{When the arithmetic accelerator circuit is always operating.}
∗4 _{C1 and C2 indicate the external capacitors attached to the EXTAL and XTAL pins, respectively.}
– 32 –