CXA2060BS Datasheet, PDF (32/54 Pages) Sony Corporation – Y/C/RGB/D for PAL/NTSC/SECAM Color TVs

CXA2060BS
FH HI
(1) Increases the free-running frequency of the H oscillation frequency 1kHz.
(ON mode set at power ON)
0 = Max. frequency mode ON
1 = Max. frequency mode OFF (standard free-running frequency)
HD W
(1) HD pulse width switch (set to 0 at power ON)
0 = Standard mode (25µs pulse width)
1 = Narrow pulse width mode (use this mode when the time between the HD rising
edge and FBP rising edge is short)
V SIZE
(6) Vertical picture size adjustment (VD output gain control)
0h = –15% (min. size)
1Fh = 0%
3Fh = +15% (max. size)
V POSITION
(6) Vertical picture position adjustment (DC bias control for VD output)
0h = –0.1V (lowers picture position)
1Fh = 0V (center 3V DC)
3Fh = +0.1V (raises picture position)
S CORRECTION
(4) Vertical S distortion correction amount adjustment
(gain control for secondary component of VD)
0h = Secondary component amplitude added to the VD signal is 0mVp-p
Fh = Secondary component amplitude added to the VD signal is 100mVp-p
V LINEALITY
(4) Vertical linearity adjustment (gain control for secondary component of VD)
0h = 85% (picture bottom/picture top) picture top enlarged
1Fh = 100% (picture bottom/picture top)
3Fh = 115% (picture bottom/picture top) picture top compressed
EHT COMP
(4) High-voltage fluctuation compensation setting for vertical picture size
(gain control for VD output)
0h = 0%
Fh = –5% (max. compensation)
V ON
(1) VD output ON/OFF switch (set to 0 at power ON)
0 = DC voltage
1 = Sawtooth wave
H SIZE
(6) Horizontal picture size adjustment (DC bias control for EW output)
0Fh = –0.5V (small horizontal picture size)
1Fh = 0V (center 4V DC)
3Fh = +0.5V (large horizontal picture size)
– 32 –