ILX734K Datasheet, PDF (3/11 Pages) Sony Corporation – 10500 X 3 pixel CCD Linear Sensor (Color)

ILX734K
Electrooptical Characteristics (Note 1)
Ta = 25°C, VDD = 12V, fφRS = 1MHz, Input clock = 5Vp-p, Light source = 3200K, IR cut filter CM-500S (t = 1.0mm)
Item
Symbol Min.
Typ. Max.
Unit Remarks
Red RR
1.3
2.0
2.7
Sensitivity
Green RG
2.1
3.2
4.3 V/(lx · s) Note 2
Blue RB
1.6
2.5
3.4
Sensitivity nonuniformity PRNU
—
6
20
%
Note 3
Saturation output voltage VSAT
2
3.2
—
V
Note 4
Saturation
exposure
Red SER
Green SEG
Blue SEB
0.74
1.6
—
0.46
1
—
lx · s Note 5
0.58
1.28
—
Dark voltage average
VDRK
—
0.3
2.2
mV Note 6
Dark signal nonuniformity DSNU
—
1.5
5.5
mV Note 6
Image lag
IL
—
0.02
—
%
Note 7
Supply current
IVDD
—
26
50
mA
—
Total transfer efficiency TTE
92
95
—
%
—
Output impedance
ZO
Offset level
VOS
—
250
—
—
6.5
—
Ω
—
V
Note 8
Dynamic range
DR
1000 10670 —
—
Note 9
Note
1) In accordance with the given electrooptical characteristics, the black level is defined as the average value
of D2, D3 to D12.
2) For the sensitivity test light is applied with a uniform intensity of illumination.
3) PRNU is defined as indicated below. Ray incidence conditions are the same as for Note 2.
VOUT-G = 500mV (Typ.)
PRNU =
(VMAX – VMIN) /2
VAVE
× 100 [%]
Where the 10500 pixels are divided into blocks of 100. The maximum output of each block is set to VMAX,
the minimum output to VMIN and the average output to VAVE.
4) Use below the minimum value of the saturation output voltage.
5) Saturation exposure is defined as follows.
SE = ^VSAT
R
Where R indicates RR, RG, RB, and SE indicates SER, SEG, SEB.
6) Optical signal accumulated time τ int stands at 11ms.
VOUT
7) VOUT-G = 500mV (Typ.)
8) Vos is defined as indicated bellow.
VOUT indicates VOUT-R, VOUT-G, and VOUT-B.
VOS
9) Dynamic range is defined as follows.
DR = ^VSAT
VDRK
GND
When the optical signal accumulated time is shorter, the dynamic range gets wider because the optical
signal accumulated time is in proportion to the dark voltage.
–3–