CXD2464R Datasheet, PDF (29/97 Pages) Sony Corporation – Timing Generator for LCD Panels

CXD2464R
(H-6) MBK2, 1, 0, B, A
These bits set the skip-scan-related mode timings. These timings enable XGA (scanning line conversion from
768 to 598 vertical lines by 5, 4 skip scan) display for the LCX026, XGA (scanning line conversion from 768 to
615 vertical lines by 6, 4 skip scan) display for the LCX016, and SVGA (scanning line conversion from 600 to
480 vertical lines by 6, 4 skip scan) and double-speed PAL (scanning line conversion from 575 to 480 vertical
lines by 6, 7 skip scan) display for the LCX012BL. However, for XGA and SVGA display, the horizontal
direction is supported by external signal processing.
Note) Supported input signals (XGA, SVGA) differ for each panel. Use the XGA skip scan display of the
LCX026 in the XGA mode, the XGA skip scan display of the LCX016 in the Macintosh16 mode, and the
SVGA skip scan display of the LCX012BL in the VGA or SVGA mode. At that time, the display area
other than the image display area is written by the blanking level of the video signal according to the
mode.
Setting during LCX026 panel driving
When the input signal is XGA (1024 × 768), set the operation of the CXD2464R to the XGA mode of the
LCX026, and set the serial data HSTP to HSTP3/2/1/0: HLLH (LSB).
See the Timing Charts for details.
HST
9 clk
HCK1
HCK2
HSTP3, 2, 1, 0: HLLH (LSB)
(1) MBK2
This bit sets the FRP-related skip scan timing.
VST
VCK
FRP
HST/PCG
ENB
MBK2: H (MAIN)
MBK2: L (SUB)
– 29 –