CXR702F080 Datasheet, PDF (23/32 Pages) Sony Corporation – CMOS 32-bit Single Chip Microcomputer

CXR702F080
Electrical Characteristics
DC Characteristics (VDD = 2.7 to 3.6V)
(Topr = –20 to +75°C, Vss = 0V reference)
Item Symbol
Pins
Conditions
Min. Typ. Max. Unit
PA to PC, PE to PL, PN, PO,
T1, T3, TxD0, TxD1, MCS0,
MCS1, MA0 to MA18,
MD0 to MD7, MRD, MWE, IOH = –0.5mA
VDD – 0.4
V
High level
output
voltage
VOH
CS0 to CS5, A0 to A23,
D0 to D15, RD, LWR, LB,
UWR, UB, WE, RST
BEEP, TXOUT, SCK0 to SCK2,
SO0 to SO2, DACK0, DACK1,
MSDIR, MSBS, MSSCLK,
IOH = –4mA
VDD – 0.4
V
MSDIO, RTCK, TDO, XOUT,
CKO
PA to PC, PE to PL, PN, PO,
T1, T3, TxD0, TxD1, MCS0,
MCS1, MA0 to MA18,
MD0 to MD7, MRD, MWE, IOL = 1mA
Low level
output
voltage
VOL
CS0 to CS5, A0 to A23,
D0 to D15, RD, LWR, LB,
UWR, UB, WE, RST
PD, BEEP, TXOUT,
SCK0 to SCK2, SO0 to SO2,
DACK0, DACK1, MSDIR,
IOL = 4mA
MSBS, MSSCLK, MSDIO,
RTCK, TDO, XOUT, CKO
0.4 V
0.4 V
IIHE
EXTAL
IILE
VIH = 3.6V
VIL = 0.4V
0.1
10 µA
–0.1
–10 µA
IIHT
TEX
IILT
VIH = 3.6V
VIL = 0.4V
0.1
10 µA
–0.1
–10 µA
IIH TRST
VIH = 3.6V
20
100 240 µA
Input
current
PA to PC, PE to PL, PN, PO,
WAIT, INT0 to INT9, EC0,
EC2, CT0ED0, CT0ED1,
IIL
CT1ED0, CT1ED1, CT2ED0,
CT2ED1, RxD0, RxD1,
VIL = Vss
MD0 to MD7, D0 to D15,
SCK0 to SCK2, SI0 to SI2,
SCS0 to SCS2^∗1
TDI, TMS, TCK
VIL = Vss
–20 –50 –120 µA
–20 –100 –240 µA
∗1 _{PA to PC, PE to PL, PN, PO, WAIT, INT0 to INT9, EC0, EC2, CT0ED0, CT0ED1, CT1ED0, CT1ED1,}
CT2ED0, CT2ED1, RxD0, RxD1, MD0 to MD7, D0 to D15, SCK0 to SCK2, SI0 to SI2 and SCS0 to
SCS2 pins specify the input current when the pull-up resistor is selected, and specify leakage current
when non-resistor is selected.
– 23 –