ICX075AL Datasheet, PDF (14/21 Pages) Sony Corporation – Diagonal 8mm (Type 1/2) Progressive Scan CCD Image Sensor with Square Pixel for CCIR B/W Video Cameras

ICX075AL
6. Dark signal shading
After measuring 5, measure the maximum (Vdmax [mV]) and minimum (Vdmin [mV]) values of the dark
signal output and substitute the values into the following formula.
∆Vdt = Vdmax – Vdmin [mV]
7. Lag
Adjust the signal output value generated by strobe light to 120mV. After setting the strobe light so that it
strobes with the following timing, measure the residual signal (Vlag). Substitute the value into the following
formula.
Lag = (Vlag/120) × 100 [%]
FLD
SG
Strobe light
timing
Output
Light
Signal output 120mV Vlag (lag)
8. Uniformity between output channels
Set to standard imaging condition I. Measure the signals at signal output 1 (V1) and at signal output 2 (V2),
and substitute the values into the following formula.
∆V =
| V2 – V1 |
V1
× 100 [%]
– 14 –