ICX415AL Datasheet, PDF (13/30 Pages) Sony Corporation – Diagonal 8mm (Type 1/2) Progressive Scan CCD Solid-state Image Sensor with Square Pixel for CCIR B/W Cameras

ICX415AL
5. Dark signal
Measure the average value of the signal output (Vdt [mV]) with the device ambient temperature 60°C and
the device in the light-obstructed state, using the horizontal idle transfer level as a reference.
6. Dark signal shading
After measuring 5, measure the maximum (Vdmax [mV]) and minimum (Vdmin [mV]) values of the dark
signal output and substitute the values into the following formula.
∆Vdt = Vdmax – Vdmin [mV]
7. Lag
Adjust the signal output generated by strobe light to 120mV. After setting the strobe light so that it strobes
with the following timing, measure the residual signal (Vlag). Substitute the value into the following formula.
Lag = (Vlag/120) × 100 [%]
VD
V2
Strobe light
timing
Output
Light
Signal output 120mV Vlag (lag)
– 13 –