ICX278AK Datasheet, PDF (12/19 Pages) Sony Corporation – Diagonal 4.5mm (Type 1/4) CCD Image Sensor for NTSC Color Video Cameras

ICX278AK
10. Line crawls
Set to standard imaging condition II. Adjust the luminous intensity so that the average value of the Y signal
output is 200mV, and then insert a white subject and R, G, and B filters and measure the difference
between Y signal lines for the same field (∆Ylw, ∆Ylr, ∆Ylg, ∆Ylb [mV]). Substitute the values into the
following formula.
Lci = (∆Yli/200) × 100 [%] (i = w, r, g, b)
11. Lag
Adjust the Y signal output value generated by strobe light to 200mV. After setting the strobe light so that it
strobes with the following timing, measure the residual signal (Ylag). Substitute the value into the following
formula.
Lag = (Ylag/200) × 100 [%]
FLD
V1
Strobe light
timing
Output
Light
Y signal output 200mV Ylag (lag)
– 12 –