ICX252AQ Datasheet, PDF (10/30 Pages) Sony Corporation – Diagonal 8.933mm (Type 1/1.8) Frame Readout CCD Image Sensor with Square Pixel for Color Cameras

ICX252AQ
Image Sensor Characteristics Measurement Method
Measurement conditions
1) In the following measurements, the device drive conditions are at the typical values of the bias and clock
voltage conditions, and the frame readout mode is used.
2) In the following measurements, spot blemishes are excluded and, unless otherwise specified, the optical
black level (OB) is used as the reference for the signal output, which is taken as the value of the Gr/Gb
channel signal output or the R/B channel signal output of the measurement system.
Color coding of this image sensor & Readout
B2
Gb B Gb B
The primary color filters of this image sensor are arranged in the
layout shown in the figure on the left (Bayer arrangement).
R Gr R Gr
A2 _{Gr and Gb denote the G signals on the same line as the R signal}
B1
Gb B Gb B
and the B signal, respectively.
For frame readout, the A1 and A2 lines are output as signals in
R Gr R Gr
A1 ^{the A field, and the B1 and B2 lines in the B field.}
Horizontal register
Color Coding Diagram
– 10 –