ICX414AL Datasheet, PDF (1/30 Pages) Sony Corporation – Diagonal 8mm Progressive Scan CCD Solid-state Image Sensor with Square Pixel for EIA B/W Cameras

ICX414AL
Diagonal 8mm (Type 1/2) Progressive Scan CCD Solid-state Image Sensor with Square Pixel for EIA B/W Cameras
Description
The ICX414AL is a diagonal 8mm (Type 1/2) interline
CCD solid-state image sensor with a square pixel
array suitable for EIA black-and-white cameras.
Progressive scan allows all pixel's signals to be output
independently within approximately 1/60 second. This
chip features an electronic shutter with variable
charge-storage time which makes it possible to
realize full-frame still images without a mechanical
shutter. Square pixel makes this device suitable for
image input and processing applications. High
sensitivity and low dark current are achieved through
the adoption of the HAD (Hole-Accumulation Diode)
sensors.
This chip is suitable for applications such as FA
and surveillance cameras.
Features
• Progressive scan allows individual readout of the image signals
from all pixels.
• High vertical resolution (480 TV-lines) still images without a
mechanical shutter
• Square pixel
• Supports VGA format
• Horizontal drive frequency: 24.54MHz (Max.)
• No voltage adjustments (reset gate and substrate bias are not
adjusted.)
• High resolution, high sensitivity, low dark current
• Continuous variable-speed shutter
• Low smear
• Excellent anti-blooming characteristics
22 pin DIP (Cer-DIP)
Pin 1
2
V
2
Pin 12
H
8
31
Optical black position
(Top View)
Device Structure
• Interline CCD image sensor
• Image size:
Diagonal 8mm (Type 1/2)
• Number of effective pixels: 659 (H) × 494 (V) approx. 330K pixels
• Total number of pixels: 692 (H) × 504 (V) approx. 350K pixels
• Chip size:
7.48mm (H) × 6.15mm (V)
• Unit cell size:
9.9µm (H) × 9.9µm (V)
• Optical black:
Horizontal (H) direction: Front 2 pixels, rear 31 pixels
Vertical (V) direction: Front 8 pixels, rear 2 pixels
• Number of dummy bits: Horizontal 16
Vertical 5
• Substrate material:
Silicon
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E02115C35