ICX254AL Datasheet, PDF (1/17 Pages) Sony Corporation – Diagonal 6mm (Type 1/3) CCD Image Sensor for EIA B/W Video Cameras

ICX254AL
Diagonal 6mm (Type 1/3) CCD Image Sensor for EIA B/W Video Cameras
Description
The ICX254AL is an interline CCD solid-state
image sensor suitable for EIA B/W video cameras
with a diagonal 6mm (Type 1/3) system. Compared
with the current product ICX054BL, basic
characteristics such as sensitivity, smear, dynamic
range and S/N are improved drastically from visible
light region to near infrared light region through the
adoption of EXview HAD CCD^TM technology.
This chip features a field period readout system and
an electronic shutter with variable charge-storage
time.
16 pin DIP (Plastic)
Features
• Sensitivity in near infrared light region
(+8dB compared with the ICX054BL, λ = 945nm)
• High sensitivity (+6dB compared with the ICX054BL, no IR cut filter)
Pin 1
1
• Low smear (–20dB compared with the ICX054BL)
• High D range (+2dB compared with the ICX054BL)
V
• High S/N
• Low dark current
• Excellent antiblooming characteristics
• Continuous variable-speed shutter
• No voltage adjustment
12
2
Pin 9
H
25
(Reset gate and substrate bias are not adjusted.)
• Reset gate:
5V drive
• Horizontal register: 5V drive
Optical black position
(Top View)
Device Structure
• Interline CCD image sensor
• Image size:
Diagonal 6mm (Type 1/3)
• Number of effective pixels: 510 (H) × 492 (V) approx. 250K pixels
• Total number of pixels: 537 (H) × 505 (V) approx. 270K pixels
• Chip size:
6.00mm (H) × 4.96mm (V)
• Unit cell size:
9.6µm (H) × 7.5µm (V)
• Optical black:
Horizontal (H) direction : Front 2 pixels, rear 25 pixels
Vertical (V) direction : Front 12 pixels, rear 1 pixel
• Number of dummy bits: Horizontal 16
Vertical 1 (even fields only)
• Substrate material:
Silicon
TM
∗ _{EXview HAD CCD is a trademark of Sony Corporation.}
EXview HAD CCD is a CCD that drastically improves light efficiency by including near infrared light region as a basic structure of
HAD (Hole-Accumulation-Diode) sensor.
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E99520-PS