ICX229AL Datasheet, PDF (1/17 Pages) Sony Corporation – Diagonal 4.5mm (Type 1/4) CCD Image Sensor for CCIR B/W Video Cameras

ICX229AL
Diagonal 4.5mm (Type 1/4) CCD Image Sensor for CCIR B/W Video Cameras
Description
The ICX229AL is an interline CCD solid-state
image sensor suitable for CCIR B/W video cameras.
Compared with the current product ICX209AL, smear
charactristics are improved drastically and power
consumption is reduced. High sensitivity and high
saturation signal are achieved by Super HAD CCD
technology.
This chip features a field period readout system and
an electronic shutter with variable charge-storage time.
The package is a 10mm-square 14-pin DIP (Plastic).
Features
• Low smear (–100dB Typ. at F5.6)
• Low power consumption
(–38% compared with ICX209AL)
• High sensitivity
(+3dB at F1.2 compared with ICX209AL)
• High saturation signal
• Supply voltage
12V
• Horizontal register: 3.3V drive
• Reset gate:
3.3V drive
• No voltage adjustment
(Reset gate and substrate bias are not adjusted.)
• High resolution,low dark current
• Excellent antiblooming characteristics
• Continuous variable-speed shutter
• Recommended range of exit pupil distance: –20 to –100mm
14 pin DIP (Plastic)
Pin 1
2
V
12
3
H
40
Pin 8
Optical black position
(Top View)
Device Structure
• Interline CCD image sensor
• Image size:
• Number of effective pixels:
• Total number of pixels:
• Chip size:
• Unit cell size:
• Optical black:
• Number of dummy bits:
• Substrate material:
Diagonal 4.5mm (Type 1/4)
752 (H) × 582 (V) approx. 440K pixels
795 (H) × 596 (V) approx. 470K pixels
4.34mm (H) × 3.69mm (V)
4.85µm (H) × 4.65µm (V)
Horizontal (H) direction: Front 3 pixels, rear 40 pixels
Vertical (V) direction: Front 12 pixels, rear 2 pixels
Horizontal 22
Vertical 1 (even fields only)
Silicon
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E00330A1Z