ICX087AL Datasheet, PDF (1/17 Pages) Sony Corporation – Diagonal 4.5mm (Type 1/4) CCD Image Sensor for CCIR B/W Video Cameras

ICX087AL
Diagonal 4.5mm (Type 1/4) CCD Image Sensor for CCIR B/W Video Cameras
Description
The ICX087AL is an interline CCD solid-state image
sensor suitable for CCIR B/W video cameras. High
sensitivity is achieved through the adoption of HAD
(Hole-Accumulation Diode) sensors.
This chip features a field period readout system and
an electronic shutter with variable charge-storage
time.
The package is a 10mm-square 14-pin DIP (Plastic).
14 pin DIP (Plastic)
Features
• High sensitivity and low dark current
Pin 1
1
• Horizontal register: 3.3 to 5.0V drive
• No voltage adjustment
V
(Reset gate and substrate bias are not adjusted.)
• Low smear
14
• Continuous variable-speed shutter
Device Structure
• Interline CCD image sensor
• Image size:
Diagonal 4.5mm (Type 1/4)
7
Pin 8
H
30
Optical black position
(Top View)
• Number of effective pixels: 500 (H) x 582 (V) approx. 290K pixels
• Total number of pixels:
537 (H) x 597 (V) approx. 320K pixels
• Chip size:
4.47mm (H) x 3.80mm (V)
• Unit cell size:
7.3µm (H) x 4.7µm (V)
• Optical black:
Horizontal (H) direction: Front 7 pixels, rear 30 pixels
Vertical (V) direction: Front 14 pixels, rear 1 pixel
• Number of dummy bits:
Horizontal 16
Vertical 1 (even fields only)
• Substrate material:
Silicon
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E96650D99