ICX086AKB Datasheet, PDF (1/17 Pages) Sony Corporation – Diagonal 4.5mm (Type 1/4) CCD Image Sensor for NTSC Color Video Cameras

ICX086AKB
Diagonal 4.5mm (Type 1/4) CCD Image Sensor for NTSC Color Video Cameras
Description
The ICX086AKB is an interline CCD solid-state
image sensor suitable for NTSC color video
cameras. High sensitivity is achieved through the
use of Ye, Cy, Mg, and G complementary color
mosaic filters and through the adoption of HAD
(Hole-Accumulation Diode) sensors.
This chip features a field period readout system
and an electronic shutter with variable charge-
storage time.
Also, this outline is miniaturized by using original
package.
13 pin PCA (Ceramic)
Pin 1
1
Features
• Maximum package dimentions: φ8mm
• High sensitivity and low dark current
• Horizontal register:
3.3 to 5.0V drive
• No voltage adjustment
(Reset gate and substrate bias are not adjusted.)
• Low smear
• Excellent antiblooming characteristics
• Continuous variable-speed shutter
• Ye, Cy, Mg, and G complementary color mosaic filters on chip
V
12
2
H
25
Pin 8
Optical black position
(Top View)
Device Structure
• Interline CCD image sensor
• Image size:
• Number of effective pixels:
• Total number of pixels:
• Chip size:
• Unit cell size:
• Optical black:
• Number of dummy bits:
• Substrate material:
Diagonal 4.5mm (Type 1/4)
510 (H) × 492 (V) approx. 250K pixels
537 (H) × 505 (V) approx. 270K pixels
4.47mm (H) × 3.80mm (V)
7.15µm (H) × 5.55µm (V)
Horizontal (H) direction: Front 2 pixels, rear 25 pixels
Vertical (V) direction: Front 12 pixels, rear 1 pixel
Horizontal 16
Vertical 1 (even fields only)
Silicon
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E95806E99