ICX083AL Datasheet, PDF (1/16 Pages) Sony Corporation – Diagonal 11mm (Type 2/3) CCD Image Sensor for CCIR Black-and-White Video Cameras

ICX083AL
Diagonal 11mm (Type 2/3) CCD Image Sensor for CCIR Black-and-White Video Cameras
Description
The ICX083AL is an interline CCD solid-state
image sensor suitable for CCIR black-and-white
video cameras with a diagonal 11mm (Type 2/3)
system.
High sensitivity and low dark current are achieved
through the adoption of HAD (Hole-Accumulation
Diode) sensors.
This chip features a field period readout system
and an electronic shutter with variable charge-
storage time.
20 pin DIP (Ceramic)
Pin 1
2
Features
• High sensitivity (+6dB compared with the ICX024BL)
V
• Low smear (–20dB compared with the ICX024BL)
• High resolution, Low dark current
12
• Excellent antiblooming characteristics
• Continuous variable-speed shutter
3
Pin 11
H
40
Optical black position
Device Structure
• Interline CCD image sensor
(Top View)
• Image size:
• Number of effective pixels:
• Total number of pixels:
• Chip size:
• Unit cell size:
• Optical black:
Diagonal 11mm (Type 2/3)
752 (H) × 582 (V)
approx. 440K pixels
795 (H) × 596 (V)
approx. 470K pixels
10.25mm (H) × 8.5mm (V)
11.6µm (H) × 11.2µm (V)
Horizontal (H) direction: Front 3 pixels, rear 40 pixels
• Number of dummy bits:
Vertical (V) direction: Front 12 pixels, rear 2 pixels
Horizontal 22
• Substrate material:
Vertical 1 (even fields only)
Silicon
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E95936C99