ICX082AL Datasheet, PDF (1/16 Pages) Sony Corporation – Diagonal 11mm (Type 2/3) CCD Image Sensor for EIA Black-and-White Video Cameras

ICX082AL
Diagonal 11mm (Type 2/3) CCD Image Sensor for EIA Black-and-White Video Cameras
Description
The ICX082AL is an interline CCD solid-state
image sensor suitable for EIA black-and-white video
cameras with a diagonal 11mm (Type 2/3) system.
High sensitivity and low dark current are achieved
through the adoption of HAD (Hole-Accumulation
Diode) sensors.
This chip features a field period readout system
and an electronic shutter with variable charge-
storage time.
20 pin DIP (Ceramic)
Pin 1
2
Features
V
• High sensitivity (+6dB compared with the ICX022BL)
• Low smear (–20dB compared with the ICX022BL)
• High resolution, Low dark current
• Excellent antiblooming characteristics
• Continuous variable-speed shutter
3
Pin 11
H
12
40
Optical black position
(Top View)
Device Structure
• Interline CCD image sensor
• Image size:
Diagonal 11mm (Type 2/3)
• Number of effective pixels: 768 (H) × 494 (V)
approx. 380K pixels
• Total number of pixels:
811 (H) × 508 (V)
approx. 410K pixels
• Chip size:
10.25mm (H) × 8.5mm (V)
• Unit cell size:
11.6µm (H) × 13.5µm (V)
• Optical black:
Horizontal (H) direction: Front 3 pixels, rear 40 pixels
Vertical (V) direction: Front 12 pixels, rear 2 pixels
• Number of dummy bits:
Horizontal 22
Vertical 1 (even fields only)
• Substrate material:
Silicon
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E95935C99