ICX063AL Datasheet, PDF (1/16 Pages) Sony Corporation – Diagonal 11mm (Type 2/3) CCD Image Sensor for CCIR B/W Video Camera

ICX063AL
Diagonal 11mm (Type 2/3) CCD Image Sensor for CCIR B/W Video Camera
Description
The ICX063AL is an interline CCD solid-state
image sensor suitable for CCIR black-and-white
video cameras with a diagonal 11mm (Type 2/3)
system.
High sensitivity is achieved by adopting HAD
(Hole-Accumulation Diode) sensors. The chip
features a field period readout system and an
electronic shutter with variable charge-storage time.
20 pin DIP (Ceramic)
Features
• High resolution
• Low smear
• High sensitivity, low dark current
• Excellent antiblooming characteristics
• Continuous variable-speed shutter
Pin 1
2
V
10
Device Structure
• Image size:
Diagonal 11mm (Type 2/3)
3
H
55
Pin 11
• Number of effective pixels: 980 (H) × 582 (V), approx. 570K pixels
• Total number of pixels: 1038 (H) × 594 (V), approx. 620K pixels
• Interline CCD image sensor
Optical black position
(Top View)
• Chip size:
10.75mm (H) × 8.7mm (V)
• Unit cell size:
9.4µm (H) × 11.4µm (V)
• Optical black:
Horizontal (H) direction; front 3 pixels, rear 55 pixels
Vertical (V) direction; front 10 pixels, rear 2 pixels
• Number of dummy bits: Horizontal 25
Vertical 1 (even fields only)
• Substrate material:
Silicon
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E95633D99