ICX054BL Datasheet, PDF (1/18 Pages) Sony Corporation – Diagonal 6mm (Type 1/3) CCD Image Sensor for EIA B/W Video Cameras

ICX054BL
Diagonal 6mm (Type 1/3) CCD Image Sensor for EIA B/W Video Cameras
Description
The ICX054BL is an interline CCD solid-state image
sensor suitable for EIA B/W video cameras.
Compared with the current product ICX054AL,
sensitivity is improved drastically through the adoption
of Super HAD CCD technology.
This chip features a field period readout system, and
an electronic shutter with variable charge-storage
time.
16 pin DIP (Plastic)
Features
• High sensitivity (+4dB at F8, +2dB at F1.2 compared with ICX054AL)
• High saturation signal (+1dB compared with ICX054AL)
• Low smear and low dark current
• Excellent antiblooming characteristics
• Continuous variable-speed shutter
• Horizontal register: 5V drive
• Reset gate:
5V drive
V
2
Pin 9
Pin 1
1
12
H
25
Device Structure
• Interline CCD image sensor
Optical black position
(Top View)
• Image size:
Diagonal 6mm (Type 1/3)
• Number of effective pixels: 510 (H) × 492 (V) approx. 250K pixels
• Number of total pixels:
537 (H) × 505 (V) approx. 270K pixels
• Chip size:
6.00mm (H) × 4.96mm (V)
• Unit cell size:
9.6µm (H) × 7.5µm (V)
• Optical black:
Horizontal (H) direction: Front 2 pixels, Rear 25 pixels
Vertical (V) direction:
Front 12 pixels, Rear 1 pixel
• Number of dummy bits: Horizontal 16
Vertical 1 (even field only)
• Substrate material:
Silicon
∗_{Super HAD CCD is a registered trademark of Sony Corporation. Super HAD CCD is a CCD that drastically improves sensitivity by introducing newly}
developed semiconductor technology by Sony Corporation into Sony's high-performance HAD (Hole-Accumulation Diode) sensor.
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E98223A99