English
Language : 

CXP80712A Datasheet, PDF (1/24 Pages) Sony Corporation – CMOS 8-bit Single Chip Microcomputer
CXP80712A/80716A/80720A/80724A
CMOS 8-bit Single Chip Microcomputer
For the availability of this product, please contact the sales office.
Description
The CXP80712A/80716A/80720A/80724A is a CMOS
8-bit microcomputer which consists of A/D converter,
serial interface, timer/counter, time base timer, vector
interruption, high precision timing pattern generation
circuit, PWM generator, PWM for tuner, VISS/VASS
circuit, 32kHz timer/event counter, remote control
receiving circuit, VCR vertical sync separation circuit
and the measuring circuit which measure signals of
capstan FG and drum FG/PG and other servo systems,
as well as basic configurations like 8-bit CPU, ROM,
RAM and I/O port. They are integrated into a single chip.
Also CXP80712A/80716A/80720A/80724A provides
sleep/stop function which enables to lower power
consumption and ultra-low speed instruction mode in
32kHz operation.
100 pin QFP (PIastic)
Structure
Silicon gate CMOS IC
100 pin LQFP (PIastic)
Features
• A wide instruction set (213 instructions) which cover various types of data
— 16-bit arithmetic instruction/multiplication and division instructions/boolean bit operation instruction
• Minimum instruction cycle
During operation 250ns/16MHz (Supply voltage 4.5 to 5.5V)
During operation 122µs/32kHz
• Incorporated ROM capacity 12K bytes (CXP80712A)
16K bytes (CXP80716A)
20K bytes (CXP80720A)
24K bytes (CXP80724A)
• Incorporated RAM capacity 800 bytes
• Peripheral functions
— A/D converter
8-bit, 12-channel, successive approximation system
(Conversion time 20.0µs/16MHz)
— Serial Interface
Incorporated 8-bit and 8-stage FIFO, 1-channel
(1 to 8 bytes auto transfer)
8-bit serial I/O, 1-channel
— Timer
8-bit timer, 8-bit timer/counter, 19-bit time base timer,
32kHz timer/counter
— High precision timing pattern generator PPG 19 pins 32-stage programmable
RTG 5-pins 2-channel
— PWM/DA gate output
12-bit, 2-channel (Repetitive frequency 62kHz/16MHz)
— Servo input control
Capstan FG, Drum FG/PG, CTL input
— VSYNC separator
— FRC capture unit
Incorporated 26-bit and 8-stage FIFO
— PWM output
14-bit, 1-channel
— VISS/VASS circuit
Pulse duty auto detection circuit
— Remote control receiving circuit
8-bit pulse measuring counter, 6-stage FIFO
• Interruption
21 factors, 15 vectors, multi-interruption possible
• Standby mode
SLEEP/STOP
• Package
100-pin plastic QFP/LQFP
• Piggyback/evaluation chip
CXP87700 100-pin ceramic QFP/LQFP
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E94Z08-ST