CXP7500P10 Datasheet, PDF (1/25 Pages) Sony Corporation – CMOS 8-bit Single Chip Microcomputer

CXP7500P10/7500P11
CMOS 8-bit Single Chip Microcomputer
Description
The CXP7500P10/7500P11 is a CMOS 8-bit single
chip microcomputer integrating on a single chip an A/D
converter, serial interface, timer/counter, time-base
timer, on-screen display function, I²C bus interface,
PWM output, remote control reception circuit, HSYNC
counter, watchdog timer, 32kHz timer/counter besides
the basic configurations of 8-bit CPU, ROM, RAM, I/O
ports.
The CXP7500P10/7500P11 also provides a sleep
function that enables to lower the power consumption.
CXP7500P10/7500P11 is the PROM-incorporated
version of the CXP750096/750010/750097/750011 with
built-in mask ROM. This provides the additional feature
of being able to write directly into the program. Thus, it
is most suitable for evaluation use during system
development and for small-quantity production.
64 pin SDIP (Plastic)
64 pin QFP (Plastic)
52 pin SDIP (Plastic)
Features
• A wide instruction set (213 instructions) which covers
various types of data
– 16-bit operation/multiplication and division/
Boolean bit operation instructions
• Minimum instruction cycle 167ns at 24MHz operation
122µs at 32kHz operation
• Incorporated ROM 120K bytes
Structure
• Incorporated RAM 2496 bytes (Excludes VRAM for on-screen display)
Silicon gate CMOS IC
• Peripheral functions
– A/D converter
8-bit 6-channel successive approximation method
(Conversion time of 3.25µs at 16MHz)
– Serial interface
8-bit clock sync type (MSB/LSB first selectable), 1 channel
– Timer
8-bit timer
8-bit timer/counter
19-bit time-base timer
32kHz timer/counter
– On-screen display (OSD) function 24 × 32 dots, 512 character types,
15 character colors, 2 lines × 32 characters,
frame background 8 colors/half blanking,
background on full screen 15 colors/half blanking
edging/shadowing/rounding for every line,
background with shadow for every character, double scanning,
Sprite OSD 24 × 32 dots, 1 screen, 8 colors for every dot
– I²C bus interface
– PWM output
8 bits, 8 channels
14 bits, 1 channel
– Remote control reception circuit
8-bit pulse measurement counter, 6-stage FIFO
– HSYNC counter
2 channels
– Watchdog timer
• Interruption
13 factors, 13 vectors, multi-interruption possible
• Standby mode
Sleep
• Package
64-pin plastic SDIP/QFP, 52-pin plastic SDIP
• Piggy/evaluation chip
CXP750000 64-pin ceramic PQFP/PSDIP (Supports custom font)
Perchase of Sony's I²C components conveys a licence under the Philips I²C Patent Rights to use these components
in an I²C system, provided that the system conforms to the I²C Standard Specifications as defined by Philips.
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E99104-PS