CXL1502M Datasheet, PDF (1/14 Pages) Sony Corporation – CMOS-CCD Signal Processor

CXL1502M
CMOS-CCD Signal Processor
For the availability of this product, please contact the sales office.
Description
The CXL1502M is a CMOS-CCD signal processor
30 pin SOP (Plastic)
designed for 8-mm video signal processing. In
combination with the 8-mm video Y/C signal
processing IC CXA1200Q, this IC configures a comb
filter for Y/C separation in recording an image,
elimination of line crawling and crosstalk in playing
back.
Features
• Single power supply 5V
• Low power consumption
• Built-in peripheral circuits
• Completely adjustment free
• Built-in triple progression PLL circuit
• For PAL signals
Functions
• 1H comb filter, 2H comb filter output
• Dropout compensation
• PLL circuit (triple progression)
• Clock driver
• Autobias circuit
• Sync tip clamp circuit
• Sample and hold circuit
• Delay time matching through output (THR)
Structure
CMOS-CCD
Absolute Maximum Ratings (Ta = 25°C)
• Supply voltage
VDD
6
V
• Operating temperature Topr –10 to +60 °C
• Storage temperature
Tstg –55 to +150 °C
• Allowable power dissipation PD
500 mW
Recommended Operating Conditions (Ta = 25°C)
Supply voltage
VDD 5 ± 5%
V
Recommended Clock Conditions (Ta = 25°C)
• Input clock amplitude
VCLK 0.3 to 1.0 Vp-p
(0.4Vp-p Typ.)
• Clock frequency
fCLK 4.433619 MHz
• Input clock waveform
sine wave
Input Signal Amplitude
VSIG
575 mVp-p
(Max.)
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E80334-PS