CXL1501M Datasheet, PDF (1/12 Pages) Sony Corporation – CMOS-CCD Signal Processor

CXL1501M
CMOS-CCD Signal Processor
For the availability of this product, please contact the sales office.
Description
The CXL1501M is a CMOS-CCD signal processor
30 pin SOP (Plastic)
designed for 8-mm VCR video signal processing. In
combination with the 8-mm VCR video Y/C signal
processing IC CXA1200Q, this IC configures a comb
filter for Y/C separation in recording an image and
elimination of crosstalk in playing back.
Features
• Single power supply 5V
• Low power consumption 225mW (Typ.)
• Built-in peripheral circuits
• Completely adjustment free
• Built-in quadruple progression PLL circuit
• For NTSC signals
Functions
• 1H comb filter output
• Dropout compensation (D.O.C) output
• Delay time matching through output (THR)
• PLL circuit (quadruple progression)
• Clock driver
• Autobias circuit
• Sync tip clamp circuit
• Sample and hold circuit
Structure
CMOS-CCD
Absolute Maximum Ratings (Ta = 25°C)
• Supply voltage
VDD
6
V
• Operating temperature Topr –10 to +60 °C
• Storage temperature
Tstg –55 to +150 °C
• Allowable power dissipation PD
500 mW
Recommended Operating Conditions (Ta = 25°C)
Supply voltage
VDD 5 ± 5%
V
Recommended Clock Conditions (Ta = 25°C)
• Input clock amplitude
VCLK 0.4 to 1.0 Vp-p
(0.5Vp-p Typ.)
• Clock frequency
fCLK 3.579545 MHz
• Input clock waveform
sine wave
Input Signal Amplitude
VSIG
571 mVp-p
(Max.)
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E71050-PS