CXG1195XR Datasheet, PDF (1/7 Pages) Sony Corporation – High Power SP5T Antenna Switch MMIC for GSM/UMTS Dual Mode

High Power SP5T Antenna Switch MMIC for GSM/UMTS Dual Mode
CXG1195XR
Description
The CXG1195XR is a SP5T antenna switch for GSM/UMTS applications. The low insertion loss on transmit
means increased talk time as the Tx power amplifier can be operated at a lower output level. On chip logic
reduces component count and simplifies PCB layout by allowing direct connection of the switch to digital base
band control lines with the CMOS logic levels. It requires 3 CMOS control lines. The Sony GaAs JPHEMT
MMIC process is used for low insertion loss.
(Applications: GSM/UMTS dual mode handsets)
Features
‹ Insertion loss (Tx) : 0.40dB (Typ.) at 34dBm (GSM900)
0.50dB (Typ.) at 32dBm (GSM1800)
0.50dB (Typ.) at 29dBm (UMTS2100)
Package
Small and low height package size: 20-pin XQFN (2.7mm × 2.7mm × 0.35mm (Typ.))
Structure
GaAs JPHEMT MMIC
This IC is ESD sensitive device. Special handling precautions are required.
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license
by any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating
the operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
-1-
E05X14A66