CXG1108K Datasheet, PDF (1/6 Pages) Sony Corporation – Power Amplifier Module for JCDMA

CXG1108K
Power Amplifier Module for JCDMA
Description
The CXG1108K is the power amplifier module
which operates at a single power supply. This IC is
designed using the Sony’s original p-Gate HFET
process.
8 pin LCC (Ceramic)
Features
• Single power supply operation:
VDD1 = VDD2 = 3.5V,
VGG = 2.95V (@High mode),
VGG = 2.7V (@Low mode)
• Ultrasmall package: 0.065cc (6.2mm × 6.2mm × 1.7mm)
• High efficiency: ηadd = 37.5% (@900MHz, POUT = 27dBm)
• Output power (high/low mode switching supported):
POUT ≤ 17dBm: Low mode (VGG = 2.7V)
POUT = 17 to 27dBm: High mode (VGG 2.95V)
• Gain: Gp = 26dB (@900MHz)
Applications
Power amplifier for JCDMA system cellular phones
Structure
p-Gate HFET module
Recommended Operating Conditions
VDD = 3.3 to 4.2V
VGG = 2.95V±1% (High Mode)
2.7V±1% (Low Mode)
Absolute Maximum Ratings
• Operating case temperature
• Storage temperature
• Bias voltage
• Bias voltage
• Input power
Tcase
–30 to +85
°C
Tstg
–30 to +125
°C
VDD1, VDD2
6
V
VGG
3.3
V
(VDD1 = VDD2 = 3.5V)
PIN
8
dBm
GaAs module is ESD sensitive devices. Special handling precautions are required.
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E00Y33A25-PS