CXG1106EN Datasheet, PDF (1/6 Pages) Sony Corporation – High Power 2 × 4 Antenna Switch MMIC with Integrated Control Logic

CXG1106EN
High Power 2 × 4 Antenna Switch MMIC with Integrated Control Logic
Description
The CXG1106EN is a high power antenna switch
MMIC for PDC 800MHz and 1.5GHz handsets. The
CXG1106EN is suited to connect Tx/Rx to one of 4
antennas. The CXG1106EN has on-chip logic circuit
for operation with 3 CMOS inputs. The Sony JFET
process is used for low insertion loss and low voltage
operation.
Features
• Low insertion loss: 0.25dB @900MHz, 0.35dB @1.5GHz
• High linearity: Harmonic < – 65dBc
• CMOS compatible input control
• Small package: 16-pin VSON (2.7mm × 3.5mm)
Applications
2 × 4 antenna switch for digital cellular such as PDC handsets
Structure
GaAs J-FET MMIC
Absolute Maximum Ratings (Ta = 25°C)
• Bias voltage
VDD
7
V
• Control voltage
VDD
5
V
• Operating temperature
Topr –35 to +85
°C
• Storage temperature
Tstg –65 to +150 °C
16 pin VSON (Plastic)
GaAs MMICs are ESD sensitive devices. Special handling precautions are required.
The actual ESD test data will be available later.
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E00X14C2Z-PS