CXG1061TN Datasheet, PDF (1/5 Pages) Sony Corporation – Low Noise Down Conversion Mixer for PHS

CXG1061TN
Low Noise Down Conversion Mixer for PHS
Description
The CXG1061TN is a low noise down conversion
mixer MMIC for PHS. This IC is designed using the
Sony’s GaAs J-FET process.
10 pin TSSOP (Plastic)
Features
• High gain
Gc=22 dB (Typ.)
• Low distortion
Input IP3=–13 dBm (Typ.)
• Low LO input power operation
PLO=–15 dBm
• High image suppression ratio
IMR=27 dBc (Typ.)
• LO input matching circuit
• Single 3 V power supply operation
• 10-pin TSSOP package
Function
Frequency conversion
Absolute Maximum Ratings (Ta=25 °C)
• Supply voltage
VDD
4.5
V
• Input power
PIN
+5 dBm
• Operating temperature Topr –35 to +85 °C
• Storage temperature Tstg –65 to +150 °C
Recommended Operating condition
• Supply voltage
VDD 2.7 to 3.3 V
Applications
Japan digital cordless telephones (PHS)
Structure
GaAs J-FET MMIC
Block Diagram
Pin Configuration
RF AMP
RFIN 7
IF AMP
5 IFOUT
MIX
1 _LOIN
LO AMP
VDD (RF AMP) 6
RFIN 7
CAP 8
GND 9
VDD (LO AMP) 10
5 IFOUT/VDD (MIX, IF AMP)
4 CAP
3 GND
2 CAP
1 LOIN
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
—1—
E98335A8Y