CXD2932AGA-2 Datasheet, PDF (1/19 Pages) Sony Corporation – GPS Base Band LSI

GPS Base Band LSI
CXD2932AGA-2
Description
The CXD2932AGA-2 is a dedicated LSI for the GPS
(Global Positioning System) satellite-based position
measurement system.
This LSI contains a 32-bit RISC CPU, satellite
tracking circuit, 2M-bit mask ROM, RAM, UART,
interval timer, and others.
This LSI, used together with the RF LSI, enables the
configuration of a 2-chip system capable of measuring
its position anywhere on the globe.
Features
• 16-channel GPS receiver capable of
simultaneously receiving 16 satellites
• Supports differential GPS
— Conforms to RTCM SC-104 Ver. 2.1
— Supports DARC
• All-in-view measurement
• Timer supporting GPS time
• 32-bit RISC CPU
• 256K-byte program ROM
• 40K-byte RAM
• Power management function
• 1PPS supported
• 2-channel UART
• 4-channel interval timer
• 16-bit general-purpose I/O port
• 12-bit successive approximation system A/D
converter (4-channel analog switch)
144 pin LFLGA (Plastic)
Absolute Maximum Ratings
• Supply voltage VDD VSS – 0.5 to 4.6 V
• Input voltage
VI VSS – 0.5 to VDD + 0.5 V
• Output voltage VO VSS – 0.5 to VDD + 0.5 V
• Operating temperature
Topr
–40 to +85
°C
• Storage temperature
Tstg
–50 to +150
°C
Recommended Operating Conditions
• Supply voltage VDD
3.0 to 3.6
V
• Operating temperature
Topr
–40 to +85
°C
Input/Output Pin Capacitance
• Input capacitance CIN
9 (Max.)
pF
• Output capacitance COUT 11 (Max.)
pF
• I/O capacitance
CI/O
11 (Max.)
pF
Structure
Silicon gate CMOS IC
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E03202A37