CXD2460R Datasheet, PDF (1/36 Pages) Sony Corporation – Timing Generator for Progressive Scan CCD Image Sensor

CXD2460R
Timing Generator for Progressive Scan CCD Image Sensor
Description
The CXD2460R is an IC developed to generate the
timing pulses required by Progressive Scan CCD
image sensors as well as signal processing circuits.
48 pin LQFP (Plastic)
Features
• Electronic shutter function
• Supports non-interlaced operation
• Base oscillation frequency 28.636MHz
• Horizontal drive frequency switchable between
14.3/7.2MHz
• Switchable between FINE (Progressive Scan) mode
or DRAFT (high-speed draft) mode
• Built-in vertical driver
Applications
Progressive Scan CCD cameras
Structure
Silicon gate CMOS IC
Applicable CCD Image Sensor
ICX205AK
Absolute Maximum Ratings
• Supply voltage VDDa, VDDb, VDDc, VDDd
Vss – 0.5 to Vss + 7.0 V
• Supply voltage VSS VL – 0.5 to VL + 26.0 V
• Supply voltage VH VL – 0.5 to VL + 26.0 V
• Supply voltage VM VL – 0.5 to VL + 26.0 V
• Input voltage VI Vss – 0.5 to VDDa,b,c,d + 0.5 V
• Output voltage VO Vss – 0.5 to VDDa,b,c,d + 0.5 V
• Operating temperature
Topr
–20 to +75
°C
• Storage temperature
Tstg
–55 to +150
°C
Recommended Operating Conditions
• Supply voltage 1 VDDa, VDDb, VDDd
3.0 to 3.6
V
• Supply voltage 2 VDDc
3.0 to 5.25
V
• Supply voltage 3 VH
14.25 to 15.75
V
• Supply voltage 4 VL
–9.0 to –5.0
V
• Supply voltage 5 VM
0
V
• Operating temperature
Topr
–20 to +75
°C
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E98414-PS