CXD2436Q Datasheet, PDF (1/34 Pages) Sony Corporation – Timing Generator for LCD Panels

CXD2436Q
Timing Generator for LCD Panels
For the availability of this product, please contact the sales office.
Description
The CXD2436Q is a timing signal generator for the
100 pin QFP (Plastic)
VGA LCD panel LCX012 driver. This chip has a
built-in serial interface circuit which allows the mode
to be switched with respect to various VGA signals
through direct control from an external
microcomputer, etc.
Features
• Generates the LCX012 drive pulse.
• Supports three-panel projectors.
• Built-in serial interface circuit
• Supports various VGA signals. (non-interlaced
mode)
• Built-in 2-line pair drive circuits
• Supports NTSC and PAL systems.
• Supports up/down and/or right/left inversion.
• Supports line inversion and field inversion.
• Generates timing signal of external sample-and-
hold circuit.
Applications
LCD projectors, etc.
Absolute Maximum Ratings (Ta=25 °C)
• Supply voltage
VDD VSS–0.5 to +7.0 V
• Input voltage
VI VSS–0.5 to VDD+0.5 V
• Output voltage
VO VSS–0.5 to VDD+0.5 V
• Operating temperature
Topr –20 to +75 °C
• Storage temperature
Tstg –55 to +150 °C
Recommended Operating Conditions
• Supply voltage
VDD
+4.5 to +5.5
V
• Supply voltage
VCC
–20 to +75 °C
Structure
Silicon gate CMOS IC
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
—1—
E95810-TE