CXD2412AQ Datasheet, PDF (1/36 Pages) Sony Corporation – Timing Generator for LCD Panels

CXD2412AQ
Timing Generator for LCD Panels
Description
The CXD2412AQ is a timing signal generator for
LCD panel drivers.
Features
• Generates the LCX007 drive pulse.
• Supports NTSC/PAL.
(With PAL, a video signal on which scanning line
conversion has been performed is used.)
• Supports WIDE.
• Supports HD (20 MHz band).
• Supports Muse-NTSC conversion signal (MNDC).
• Supports up/down and/or right/left inversion.
• Supports three-panel projector.
• Generates timing signal of external sample-and-
hold circuit.
• Generates line inversion and field inversion
signals.
• AC drive for LCD panel during no signal.
• AFC circuit supporting static and dynamic
fluctuations.
Applications
LCD projectors
Structure
Silicon gate CMOS IC
Absolute Maximum Ratings (Ta = 25 °C)
• Supply voltage
VDD VSS–0.5 to +7.0 V
• Input voltage
VI VSS – 0.5 to VDD + 0.5 V
• Output voltage
VO VSS – 0.5 to VDD + 0.5 V
• Operating temperature Topr –20 to +75 °C
• Storage temperature Tstg –55 to +150 °C
Recommended Operating Conditions
• Supply voltage
VDD
5.0 ± 0.5
V
• Operating temperature Topr –20 to +75 °C
100 pin QFP (Plastic)
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E94Y04-ST