CXD2302Q Datasheet, PDF (1/25 Pages) Sony Corporation – 8-bit 50MSPS Video A/D Converter with Clamp Function

CXD2302Q
8-bit 50MSPS Video A/D Converter with Clamp Function
Description
The CXD2302Q is an 8-bit CMOS A/D converter
for video with synchronizing clamp function. The
adoption of 2 step-parallel method achieves low
power consumption and a maximum conversion rate
of 50MSPS.
32 pin QFP (Plastic)
Features
• Resolution: 8 bit ± 1/2LSB (DL)
• Maximum sampling frequency: 50MSPS
• Low power consumption: 125mW (at 50MSPS typ.)
(reference current excluded)
• Synchronizing clamp function
• Clamp ON/OFF function
• Reference voltage self-bias circuit
• Input CMOS/TTL compatible
• 3-state TTL compatible output
• Single 5V power supply or dual 5V/3.3V power supply
• Low input capacitance: 15pF
• Reference impedance: 370Ω (typ.)
Applications
Wide range of applications that require high-speed
A/D conversion such as TV and VCR.
Structure
Silicon gate CMOS IC
Absolute Maximum Ratings (Ta = 25°C)
• Supply voltage VDD
7
V
• Reference voltage VRT,VRBVDD + 0.5 to Vss – 0.5V
• Input voltage
VIN VDD + 0.5 to Vss – 0.5V
(Analog)
• Input voltage
VI
VDD + 0.5 to Vss – 0.5V
(Digital)
• Output voltage VO VDD + 0.5 to Vss – 0.5V
(Digital)
• Storage temperature
Tstg
–55 to +150 °C
Recommended Operating Conditions
• Supply voltage AVDD, AVss 4.75 to 5.25 V
DVDD, DVss 3.0 to 5.5
V
| DVss – AVss | 0 to 100 mV
• Reference input voltage
VRB
0 and above V
VRT
2.7 and below V
• Analog input
VIN
1.7Vp-p above
• Clock pulse width
TPW1, TPW0 9ns (min) to 1.1µs (max)
• Operating ambient temperature
Topr
–40 to +85 °C
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E94102E78-PS