CXD1913AQ Datasheet, PDF (1/36 Pages) Sony Corporation – Digital Video Encoder

Digital Video Encoder
CXD1913AQ
Description
The CXD1913AQ is a digital video encoder designed
for video CD, car navigation system and other digital
video applications. The device accepts ITU-R601
compatible Y, Cb, Cr data and also accepts ITU-
R656-format Y, Cb, Cr data, and the data are
encoded to composite video and separate Y/C video
(S-Video) signal.
64 pin QFP (Plastic)
Features
• NTSC and PAL encoding mode
• Composite video and separate Y/C video (S-Video)
signal outputs
• 8/16-bit pixel data input mode
• 13.5 Mpps pixel rate
• Interlace and non-interlace supported
• On-chip 100% color bar generator
• 10-bit 3 channels DACs
• Supports I²C bus (400kHz) and SONY SIO
• Closed Caption (Line 21, Line 284) encoding
• VBID encoding
• Monolithic CMOS single 3.3V ± 5% and 5.0V ± 5%
power supplies
• 64-pin plastic QFP package
Absolute Maximum Ratings
• Supply voltage
VDD –0.3 to +7.0 V
• Input voltage
VI
–0.3 to +7.0 V
• Output voltage
VO –0.3 to +7.0 V
• Operating temperature Topr –20 to +75 °C
• Storage temperature Tstg –40 to +125 °C
(Vss = 0V)
Recommended Operating Conditions
• Logic supply voltage DVDD 3.3V ± 5%
DVDD 5.0V ± 5%
• Analog supply voltage AVDD 3.3V ± 5%
AVDD 5.0V ± 5%
• Input voltage
VIN
Vss to VDD
V
• Operating temperature Topr 0 to +70
°C
I/O Capacitance
• Input pin
• Output pin
CI
11 (Max.) pF
CO
11 (Max.) pF
Note) Test conditions: VDD = VI = 0V
fM = 1MHz
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E97918-PS