|
CXD1910AQ Datasheet, PDF (1/28 Pages) Sony Corporation – Digital Video Encoder | |||
|
Digital Video Encoder
CXD1910AQ
Description
The CXD1910AQ is a digital video encoder
designed for set top box, digital VCRs and other
digital video applications. The device accepts ITU-
R601 compatible Y, Cb, Cr data, and the data are
encoded to analog composite video and Y/C video
(S-Video) signal.
64 pin QFP (Plastic)
Features
⢠NTSC and PAL encoding mode
⢠Composite video and separate Y/C video (S-
Video) outputs
⢠Y, U, and V outputs
⢠8/16-bit pixel data input mode
⢠13.5 Mpps pixel rate
⢠10-bit 3 channels DACs
⢠Supports I2C bus (400kHz) and SONY SIO
⢠Closed Caption (Line 21, Line 284) encoding
⢠Macrovision Pay-Per-View copy protection systemâ
Rev. 6.1
⢠Monolithic CMOS single 5.0V power supply
⢠64-pin plastic QFP package
â This device is protected by U.S. patent numbers
4631603, 4577216 and 4819098 and other
intellectual property rights. Use of the Macrovision
anticopy process in the device is licensed by
Macrovision for non-commercial home use only.
Reverse engineering or disassembly is prohibited.
Absolute Maximum Ratings
⢠Supply voltage
VDD â0.3 to +7.0 V
⢠Input voltage
VI
â0.3 to +7.0 V
⢠Output voltage
VO â0.3 to +7.0 V
⢠Operating temperature Topr â20 to +75 °C
⢠Storage temperature Tstg â40 to +125 °C
(Vss = 0V)
Recommended Operating Conditions
⢠Supply voltage
VDD 4.75 to 5.25 V
⢠Input voltage
VIN
Vss to VDD
V
⢠Operating temperature Topr 0 to +70
°C
I/O Capacitance
⢠Input pin
⢠Output pin
CI
11 (Max.) pF
CO
11 (Max.) pF
Note) Test conditions: VDD = VI = 0V
fM = 1MHz
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
â1â
E95235A66-ST
|
▷ |