CXB1596AR Datasheet, PDF (1/15 Pages) Sony Corporation – 10-bit Transceiver

10-bit Transceiver
CXB1596AR
Description
The CXB1596AR is a transceiver IC with a built-in
PLL for Fibre Channel and Gigabit Ethernet. For a
receiver 1.0625/1.25Gbaud serial data is received
and output as 10-bit parallel data; for a transmitter
10-bit parallel data is received and output as
1.0625/1.25Gbaud serial data.
64 pin LQFP (Plastic)
Features
• Transmitter and receiver in a single chip
• ANSI X3T11 Fibre Channel compatible (FC_0) at
1.0625Gbaud
• IEEE802.3z Gigabit Ethernet compatible at
1.25Gbaud
• Conforms to 10-bit interface specification
• TTL/ECL compatible
• PLL for clock generation and clock & data recovery
• Byte synchronization detector (positive character of
Comma)
• Frequency autolock function
• Low power consumption (620mW typ.)
• 64-pin plastic LQFP package (10mm × 10mm)
Applications
• 1.0625Gbaud Fibre Channel Interface
• 1.25Gbaud Gigabit Ethernet Interface
• Work Station/Server/HDD Interface
• High-speed data communications
• Switched networks
Structure
Bipolar silicon monolithic IC
Absolute Maximum Ratings
• Supply voltage
VCC –0.3 to +4
V
• TTL DC input voltage VI_T –0.5 to +5.5
V
• ECL DC input voltage VI_E VCC – 2 to VCC V
• ECL differential input voltage amplitude
VIS_E –4 to +4
V
• TTL high level output current
IOH_T –20 to 0
mA
• TTL low level output current
IOL_T 0 to 20
mA
• ECL output current
IO_E –30 to 0
mA
• Storage temperature Tstg –65 to +150 °C
• Allowable power dissipation
PD
880
mW
Recommended Operating Conditions
• Supply voltage
VCC 3.135 to 3.465 V
(3.3V Typ.)
• PECL AC coupling differential output load resistance
RL (to VCC –2V) 50 Ω
(to VEE) 150
Ω
• Ambient temperature Ta
0 to +70
°C
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E99212-PS