CXB1586AR Datasheet, PDF (1/18 Pages) Sony Corporation – 10 Bit 1.0625 Gbaud Transceiver

CXB1586AR
10 Bit 1.0625 Gbaud Transceiver
For the availability of this product, please contact the sales office.
Description
The CXB1586AR is a transceiver IC with a built-in
64 pin LQFP (Plastic)
PLL for Fibre Channel. For a receiver 1.0625
Gbaud serial data is received and output it as the
10-bit parallel data; for transmitter 1.0625 Gbaud 10-
bit parallel data is output as the serial data.
Features
• Transmitter and receiver in a single chip
• ANSI X3T11 Fibre Channel compatible (FC_0) at
1.0625 Gbaud
• Conforms to 10-bit interface specification
• TTL / ECL compatible
• Single +3.3 V power supply
• PLL for clock generation and clock / data recovery
• Byte sync detector (positive character of comma)
• Local loop back circuit
• Low power consumption (0.8 W typ.)
• 64-pin plastic LQFP package (10 mm × 10 mm)
Absolute Maximum Ratings (Ta=25 °C)
• Supply voltage
VCC
–0.3 to 4
V
• Operating temperature Topr –55 to +70 °C
• Storage temperature Tstg –65 to +150 °C
• Allowable power dissipation
PD
to 1109 mW
Operating Conditions
Supply voltage
VCC 3.14 to 3.46 V
Applications
1.0625 Gbaud Fibre channel
Structure
Bipolar silicon monolithic IC
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
—1—
E97319C83-TE