CXB1585N Datasheet, PDF (1/14 Pages) Sony Corporation – Fibre Channel Repeater

Fibre Channel Repeater
Description
The CXB1585N is a repeater IC with a built-in PLL
clock recovery circuit for Fibre Channel 1.06Gbaud.
This IC incorporates a port bypass circuit and is
suitable for disk array and FC-AL HUB, etc.
Features
• Conforms to ANSI X3T11 Fibre Channel standard
• Single 3.3V power supply
• Low power consumption: 330mW (Typ.)
• Low jitter
• PLL lock detection circuit
• Port bypass circuit
• Small plastic package (24-pin SSOP)
Applications
• Fibre channel arbitrated loop 1.0625Gbaud HUB
• Disk array
Structure
Bipolar silicon monolithic IC
Pin Configuration
TEST1 ¹
VCCG ²
TDSEL^∗ 3
SDIN ⁴
SDIN^{∗ 5}
LKREF^{∗ 6}
TDIN ⁷
TDIN^{∗ 8}
REFCLK ⁹
VEET ¹⁰
VEEP ¹¹
REXT ¹²
24 VEEG
23 VEEE
22 VCCE
21 SDOUT
20 SDOUT^∗
19 TEST2
18 LKDT
17 TDOUT
16 TDOUT^∗
15 VCCP
14 LPFPOS
13 LPFNEG
CXB1585N
24 pin SSOP (Plastic)
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E96301-ST