CXA3562AR Datasheet, PDF (1/24 Pages) Sony Corporation – LCD Driver

LCD Driver
CXA3562AR
Description
The CXA3562AR is a driver IC developed for use
with Sony polycrystalline silicon TFT LCD panels. It
supports digital 2-parallel and single input, and the
input data is analog demultiplexed into 12 phases and
output. The CXA3562AR can directly drive an LCD
panel, and the VCOM setting circuit and precharge
pulse waveform generator are also on-chip.
Features
• Supports 10-bit 2-parallel and single input
• Supports signals up to UXGA
(1/2 clock when using UXGA signals)
• Low output deviation by on-chip output offset cancel circuit
• Supports both line inversion and dot and line inversion
• On-chip timing generator with ECL
• VCOM voltage generation circuit
• Precharge pulse waveform generation circuit
Applications
LCD projectors and other video equipment
Absolute Maximum Ratings (VSS = 0V)
• Supply voltage
VCC
16
V
VDD
5.5
V
• Operating temperature
Topr –20 to +70 °C
• Storage temperature
Tstg –65 to +150 °C
• Allowable power dissipation PD
2000 mW
Recommended Operating Conditions
• Supply voltage
VCC 15.0 to 15.5 V
VDD 4.75 to 5.25 V
• Operating temperature
Topr –20 to +70 °C
100 pin LQFP (Plastic)
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E01820A22